ABB +N5600 Firmware Instructions page 222

222 Parameters
No. Name/Value
14.86 AO2 actual value
0.000 ... 22.000 mA Value of AO2.
14.87 AO2 source
14.88 AO2 force data
0.000 ... 22.000 mA Forced value of analog output AO2.
14.89 AO2 filter time
0.000 ... 30.000 s
14.90 AO2 source min
-32768.0 ...
32767.0
Description
(Visible when 14.01 Module 1 type
Displays the value of AO2 in mA.
This parameter is read-only.
(Visible when 14.01 Module 1 type
Selects a signal to be connected to analog output AO2.
Alternatively, sets the output to excitation mode to feed a
constant current to a temperature sensor.
For the selections, see parameter
(Visible when 14.01 Module 1 type
Forced value that can be used instead of the selected output
signal. See parameter 14.71 AO force
(Visible when 14.01 Module 1 type
Defines the filtering time constant for analog output AO2. See
parameter 14.79 AO1 filter
Filter time constant.
(Visible when 14.01 Module 1 type
Defines the real value of the signal (selected by parameter
14.87 AO2 source) that corresponds to the minimum AO2
output value (defined by parameter
min).
I (mA)
AO2
14.93
14.92
14.90
I (mA)
AO2
14.93
14.92
14.91
Real signal value corresponding to minimum AO2 output
value.
= FAIO-01)
= FAIO-01)
14.77 AO1 source.
= FAIO-01)
selection.
= FAIO-01)
time.
= FAIO-01)
14.92 AO2 out at AO2 src
14.91
Signal (real)
selected by par.
14.87
14.90
Signal (real)
selected by par.
14.87
Def/FbEq16
-
1000 = 1 mA
Zero
0.000 mA
1000 = 1 mA
0.100 s
1000 = 1 s
0.0
1 = 1