ABB +N5600 Firmware Instructions page 409

No. Name/Value
61.101 Data set 11 data 1
value
0...65535
61.102 Data set 11 data 2
value
0...65535
61.103 Data set 11 data 3
value
0...65535
61.104 Data set 13 data 1
value
0...65535
... ...
61.124 Data set 25 data 3
value
0...65535
61.151 INU-LSU data set
10 data 1 sel
None
LSU CW
DC voltage
reference
Reactive power
reference
Other
Description
Displays (in integer format) the data to be sent to the external
controller as word 1 of data set 11.
If no data has been preselected by
selection, the value to be sent can be written directly into this
parameter.
Data to be sent as word 1 of data set 11.
Displays (in integer format) the data to be sent to the external
controller as word 2 of data set 11.
If no data has been preselected by
selection, the value to be sent can be written directly into this
parameter.
Data to be sent as word 2 of data set 11.
Displays (in integer format) the data to be sent to the external
controller as word 3 of data set 11.
If no data has been selected by
selection, the value to be sent can be written directly into this
parameter.
Data to be sent as word 3 of data set 11.
Displays (in integer format) the data to be sent to the external
controller as word 1 of data set 13.
If no data has been selected by
selection, the value to be sent can be written directly into this
parameter.
Data to be sent as word 1 of data set 13.
...
Displays (in integer format) the data to be sent to the external
controller as word 3 of data set 25.
If no data has been selected by
selection, the value to be sent can be written directly into this
parameter.
Data to be sent as word 3 of data set 25.
(Parameters 61.151...61.203
control activated by 95.20)
Parameters 61.151...61.153
set 10 to another converter (typically the supply unit of the
drive).
Parameters 61.201...61.203
other converter. If no data has been preselected, the value to
be sent can be written directly into these parameters.
For example, this parameter preselects the data for word 1 of
data set 10. Parameter
value displays the selected data in integer format. If no data is
preselected, the value to be sent can be written directly into
parameter 61.201.
None.
Control word for the supply unit.
94.20 DC voltage reference
94.30 Reactive power reference
Source selection (see Terms and abbreviations
61.51 Data set 11 data 1
61.52 Data set 11 data 2
61.53 Data set 11 data 3
61.54 Data set 13 data 1
61.74 Data set 25 data 3
only visible when supply unit
preselect data to be sent in data
display the data to be sent to the
61.201 INU-LSU data set 10 data 1
(page 472).
(page 473).
Parameters 409
Def/FbEq16
0
0
0
0
...
0
LSU CW
0
22
24084
24094
on page 148). -