ABB +N5600 Firmware Instructions page 333

No. Name/Value
35.100 DOL starter control
source
Off
On
Running
Other [bit]
35.101 DOL starter on
delay
0...42949673 s
35.102 DOL starter off
delay
0...715828 min
35.103 DOL starter
feedback source
Not selected
Selected
DI1
DI2
DI3
DI4
DI5
DI6
DIO1
DIO2
Other [bit]
Description
Parameters 35.100...35.106
control logic for external equipment such as a contactor-
controlled motor cooling fan.
This parameter selects the signal that starts and stops the
fan.
0 = Stop
1 = Start
The output controlling the fan contactor is to be connected to
parameter 35.105, bit 1. On and off delays can be set for the
fan by 35.101 and 35.102
from the fan can be connected to an input selected by 35.103;
the loss of the feedback will optionally trigger a warning or
fault (see 35.104 and 35.106).
0 (function disabled).
1.
Bit 6 of 06.16 Drive status word 1
Source selection (see Terms and abbreviations
Defines a start delay for the motor fan.
The delay timer starts when the control source selected by
parameter 35.100 switches on. After the delay, bit 1 of
switches on.
Motor fan start delay.
Defines a stop delay for the motor fan.
The delay timer starts when the control source selected by
parameter 35.100 switches off. After the delay, bit 1 of
switches off.
Motor fan stop delay.
Selects the input for motor fan feedback signal.
0 = Stopped
1 = Running
After the fan is started (bit 1 of
is expected within the time set by 35.104.
0.
1.
Digital input DI1 (10.02 DI delayed
Digital input DI2 (10.02 DI delayed
Digital input DI3 (10.02 DI delayed
Digital input DI4 (10.02 DI delayed
Digital input DI5 (10.02 DI delayed
Digital input DI6 (10.02 DI delayed
Digital input/output DIO1
Digital input/output DIO2
Source selection (see Terms and abbreviations
configure a monitored start/stop
respectively. A feedback signal
(see page 167).
on page 148). -
35.105 switches on), feedback
status, bit 0).
status, bit 1).
status, bit 2).
status, bit 3).
status, bit 4).
status, bit 5).
(11.02 DIO delayed status, bit 0).
(11.02 DIO delayed status, bit 1).
on page 148). -
Parameters 333
Def/FbEq16
Off; 06.16 b6
(95.20 b6)
0
1
2
0 s
35.105
1 = 1 s
20 min
35.105
1 = 1 min
Not selected;
DI5
(95.20 b6)
0
1
2
3
4
5
6
7
10
11