Huawei OptiX OSN 550 Configuration Manual page 206

4 Configuring Ethernet Services
4-52
User Parameter
User A1 Service
Type
Service
Direction
Source Port
Source C-
VLAN (e.g.
1, 3-6)
Sink Port
Sink C-
VLAN (e.g.
1, 3-6)
User B1 Service
Type
Service
Direction
Source Port
Source C-
VLAN (e.g.
1, 3-6)
Sink Port
Sink C-
VLAN (e.g.
1, 3-6)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
EPL The service of user A1 is an EPL service.
Bidirection The service of user A1 is a bidirectional
al service.
PORT1 When creating the bidirectional Ethernet
service from a PORT to a VCTRUNK, it is
recommended that you use a specific PORT as
the source port. In this example, the service of
user A1 occupies PORT1.
Blank In this example, the EPL service does not carry
the VLAN tag.
VCTRUN When creating the bidirectional Ethernet
K1 service from a PORT to a VCTRUNK, it is
recommended that you use a specific
VCTRUNK as the sink port. In this example,
the service of user A1 occupies VCTRUNK1.
Blank In this example, the EPL service does not carry
the VLAN tag.
EPL The service of user B1 is an EPL service.
Bidirection The service of user B1 is a bidirectional
al service.
PORT2 When creating the bidirectional Ethernet
service from a PORT to a VCTRUNK, it is
recommended that you use a specific PORT as
the source port. In this example, the service of
user B1 occupies PORT2.
Blank In this example, the EPL service does not carry
the VLAN tag.
VCTRUN When creating the bidirectional Ethernet
K2 service from a PORT to a VCTRUNK, it is
recommended that you use a specific
VCTRUNK as the sink port. In this example,
the service of user B1 occupies VCTRUNK2.
Blank In this example, the EPL service does not carry
the VLAN tag.
System
Configuration Guide
Issue 02 (2011-06-30)