Huawei OptiX OSN 550 Configuration Manual page 224

4 Configuring Ethernet Services
4-70
User Paramete
r
User C1 Level
←→
user C2
Service
Direction
Source Slot 4-EFS8-1
Source
VC4
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Sink
Timeslot
Range(e.g.
1,3-6)
Activate
Immediatel
y
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
VC12 The timeslots bound with the service
between user C1 and user C2 is at the VC-12
level. The service level must be consistent
with the level of the paths bound with the
VCTRUNK.
Bidirectiona The service between user C1 and user C2 is
l a bidirectional service.
When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the Ethernet board as the source slot.
VC4-4 The value range of Source VC4 is
consistent with the value range of
Available Resources, which is set for the
paths bound with VCTRUNK1. In this
example, Source VC4 is set to VC4-4.
1-10 The value range of the source timeslots is
consistent with the value range of
Available Timeslots, which is set for the
paths bound with VCTRUNK1. In this
example, the value range of Available
Timeslots is from VC12-1 to VC12-10.
6-SL4D-1 When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the line board as the sink slot.
VC4-1 In this example, VC4-1 is specified as the
VC-4 timeslot of the Ethernet service on the
line board.
1-10 The value range of the sink timeslots can be
the same as or different from the value
range of the source timeslots. The number
of source timeslots must be, however, the
same as the number of sink timeslots. For
example, if the source timeslots are ten
VC-12s, the sink timeslots must be ten
VC-12s.
Yes -
System
Configuration Guide
Issue 02 (2011-06-30)