Flow Of Configuring Evplan Services - Huawei OptiX OSN 550 Configuration Manual

4 Configuring Ethernet Services
Step Operation
8 Setting Performance Monitoring
Parameters of an NE
9 Backing Up the NE Database to the
SCB Board

4.3.4 Flow of Configuring EVPLAN Services

EVPLAN services of different users need to share the bandwidth. Hence, the VLAN ID or other
schemes need to be used for differentiating the services of different users. If the services of
different users need to be configured with different quality levels, you need to adopt the
corresponding QoS scheme.
The Ethernet switching boards are required for configuring EVPLAN services. The Ethernet
switching boards that support EVPLAN services are provided in
4-30
OptiX OSN 550 Multi-Service CPE Optical Transmission
Remarks
Required
Enable the performance monitoring function for a specific
NE. Then, you can obtain detailed performance records
during the operation process of this NE. These records can be
used for monitoring and analyzing the running status of this
NE.
Required
Back up the NE database to ensure that the NE can be
automatically recovered to normal operation after the SCC
data is lost or after the equipment is powered off.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
System
Configuration Guide
Table 6-1.
Issue 02 (2011-06-30)