Table 4-45 Parameters For Configuring Service Mount - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Field
Bridge Learning
Mode
Ingress Filter
MAC Address Self-
Larning
Active

Table 4-45 Parameters for configuring service mount

Field
VB Port
Mount Port
Port Type
Issue 02 (2011-06-30)
Value Range
IVL, SVL
Default value: IVL (The
bridge type is compliant
with IEEE 802.1q or
IEEE 802.1ad), SVL
(The bridge type is
compliant with
IEEE802.1d or IEEE
802.1ad)
Enabled
Default value: Enabled
Enabled
Default value: Disabled
Active
Value Range
For example: 1
For example: PORT1
For example: UNI
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuring Ethernet Services
Description
Bridge Learning Mode (Ethernet LAN
Service) indicates how the bridge learns
the MAC address. Bridge Learning
Mode is classified into the shared VLAN
learning and independent VLAN
learning modes. The shared VLAN
learning mode indicates learning and
forwarding based on the MAC address.
The independent VLAN learning mode
indicates learning and forwarding based
on the VLAN and MAC address.
You can click 7.30 Bridge Learning
Mode (Ethernet LAN Service)
Displays the detailed information.
Displays the status of the ingress filter
function.
Enabled: The ingress port checks the
validity of VLAN IDs based on the VB.
If the packets received on the ingress port
do not belong to the VLAN of the VB
port, these packets are discarded.
Indicates whether the MAC address
learning function is enabled.
Enabled: MAC addresses can be learnt.
Displays the activation status of the VB.
Description
Displays the VB port.
Allocated automatically when the VB
mount port is configured.
Displays the mount port. The mount
port may be the PORT port or VC
trunk port.
Displays the network attributes for a
port.
Value Range: UNI, C-Aware, S-
Aware. Default value: UNI
to
4-151