Configuring The Ne Data; Configuring The Ne Data Manually - Huawei OptiX OSN 550 Configuration Manual

Multi-service cpe optical transmission system
Table of Contents

Advertisement

2 Creating the Network
NOTE
Step 4 In the NE Discovery window, ClickNext.
Step 5 After the search is complete, select the uncreated NEs from the Result list and then click
Create. The Create dialog box is displayed.
Step 6 Enter the NE user name and password.
NOTE
l The default NE user is root.
l The default password is password.
Step 7 Click OK.
----End
Follow-up Procedure
If you fail to log in to the created NE, the possible causes are listed as follows:
l
l

2.2 Configuring the NE Data

After an NE is created, you need to configure the data of the NE on the U2000. Otherwise, the
U2000 still cannot manage the NE.

2.2.1 Configuring the NE Data Manually

By configuring NE data manually, you can configure the slot layout information of an NE.
2.2.2 Replicating the NE Data
You can directly replicate the data of an NE that is of the same NE type and NE version to the
newly created NE.
2.2.3 Uploading the NE Data
By uploading the NE data, you can synchronize the current NE configuration data to the
U2000 directly.
2.2.1 Configuring the NE Data Manually
By configuring NE data manually, you can configure the slot layout information of an NE.
2-6
You can repeat Steps 2 and 3 to add more search domains. You can also delete the system default search
domain.
l If you search for the NEs according to the IP address of the gateway NE and if the IP address of the
U2000 computer and the IP address of the gateway NE are within the same network segment, you can
set Address Type to IP Address Range of GNE or IP Address of GNE.
l If the IP addresses of the gateway NE and the U2000 computer are in two different network segments,
you can set Address Type to IP Address of GNE only.
l If you search the NEs according to the NSAP addresses of the NEs, you can set Address Type to
NSAP address only.
The password for the NE user is incorrect. In this case, enter the correct password for the
NE user.
The NE user is invalid. Change to use a valid NE user.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Issue 02 (2011-06-30)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents