Huawei OptiX OSN 550 Configuration Manual page 218

4 Configuring Ethernet Services
4-64
Parame Value in This Example Description
ter
Enabled PORT1: Enabled
/
Disable
d
Workin PORT1: Auto-
g Mode Negotiation
Maximu PORT1: 1522
m
Frame
Length
MAC PORT1: Non-Loopback
Loopba
ck
PHY PORT1: Non-Loopback
Loopba
ck
l Click the Flow Control tab. The parameters in the Flow Control tab page adopt the
default values.
l Click the TAG Attributes tab. After setting the parameters, click Apply.
Parame Value in This Example Description
ter
TAG PORT1: Tag Aware
Default -
VLAN
ID
VLAN -
Priority
Entry PORT1: Enabled
Detectio
n
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
The service of user C1 occupies PORT1. In
this example, Enabled/Disabled is set to
Enable.
The Ethernet service access equipment of
user C1 supports the auto-negotiation mode.
In this example, Working Mode is set to
Auto-Negotiation.
Generally, this parameter adopts the default
value 1522.
The MAC loopback setting is used for fault
diagnosis. In this example, MAC
Loopback is set to Non-Loopback.
The PHY loopback setting is used for fault
diagnosis. In this example, PHY Loopback
is set to Non-Loopback.
When the port is set to Tag Aware, all data
frames transmitted and received at the port
must have VLAN tags. In this example,
TAG is set to Tag Aware.
When TAG is set to Tag Aware, you need
not set Default VLAN ID.
When TAG is set to Tag Aware, you need
not set VLAN Priority.
The equipment of user C1 supports VLANs.
Hence, the entry detection function must be
enabled to check the VLAN tag. In this way,
the user data frames with different VLAN
tags can be distinguished at one port. In this
example, Entry Detection of PORT1 is set
to Enabled.
System
Configuration Guide
Issue 02 (2011-06-30)