Huawei OptiX OSN 550 Configuration Manual page 207

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
4.
Issue 02 (2011-06-30)
Configure the cross-connections from the Ethernet services to the SDH links for user A1
and user B1.
l In the NE Explorer, select NE1 and then choose Configuration > SDH Service
Configuration from the Function Tree.
l Click Create on the lower-right pane to display the Create SDH Service dialog box.
Set the parameters as follows.
User Paramete
r
User A1 Level
Service
Direction
Source Slot 4-EFS8-1
Source
VC4
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value in Description
This
Example
VC12 The timeslot bound with the service of user
A1 is at the VC-12 level. The service level
must be consistent with the level of the path
bound with the VCTRUNK.
Bidirectiona The service of user A1 is a bidirectional
l service.
When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the Ethernet board as the source slot.
VC4-4 The value range of Source VC4 is
consistent with the value range of
Available Resources, which is set for the
paths bound with VCTRUNK1. In the case
of VCTRUNK1, the value of Available
Resources is VC4-4.
1-5 The value range of the source timeslots is
consistent with the value range of
Available Timeslots, which is set for the
paths bound with VCTRUNK1. In this
example, the value range of Available
Timeslots is from VC12-1 to VC12-5.
6-SL4D-1 When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the line board as the sink slot.
VC4-1 In this example, VC4-1 is specified as the
VC-4 timeslot of the Ethernet service on the
line board.
4 Configuring Ethernet Services
4-53