Huawei OptiX OSN 550 Configuration Manual page 44

2 Creating the Network
Step 4 To create a gateway NE, proceed to Step 5. To create a non-gateway NE, go to Step 6.
Step 5 Choose Gateway Type and Protocol, and set the IP address.
1.
2.
Step 6 Select Non-Gateway from the Gateway Type drop-down list. Select the gateway NE to which
the NE belongs from the Affiliated Gateway drop-down list.
Step 7 Set NE User and Password.
NOTE
Step 8 Optional: If you need not deliver the NE configuration data from the U2000 to the NE, select
the NE Preconfiguration check box and set NE Software Version.
NOTE
Step 9 Click OK. Click in the blank area of the Main Topology. Then, the NE icon is displayed at the
position where you clicked.
NOTE
----End
2-4
Select Gateway from the Gateway Type drop-down list.
Select the Protocol type.
If ...
The U2000 communicates
with NEs through the IP
protocol
The U2000 communicates
with NEs through the OSI
protocol
The default NE user is root, and the default password is password.
Do not deliver the NE preconfiguration data from the U2000 to the NE if the freconfiguration data is
inconsistent with the actual configurations on the NE. Otherwise, the services on the NE are affected.
If the NE creation is incorrect or if the communication between the NE and the U2000 is abnormal, the
NE is displayed in grey.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Then ...
Select IP from the Protocol drop-down list. Set IP
Address of the gateway NE and use the default value of the
Port number.
Select OSI from the Protocol drop-down list. Set NSAP
Address of the gateway NE.
System
Configuration Guide
Issue 02 (2011-06-30)