Table 2-3 Parameters For Configuring The Output Phase-Locked Source Table Of An External Clock - Huawei OptiX OSN 550 Configuration Manual

2 Creating the Network

Table 2-3 Parameters for configuring the output phase-locked source table of an external clock

Field
NE Name
External Clock Output Mode
When 2M Output
Synchronous Source Is
Invalid
Output Impedance of
External Clock Source 1
Output Impedance of
External Clock Source 2
Output Mode of External
Clock Source 1
Output Mode of External
Clock Source 2
2-24
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value Range
For example: NE(9-1001)
Synchronization Quality
Unavailable, Output AIS,
Shut off
Default value: Shut off
For example: 120 ohms
For example: 120 ohms
2 Mbit/s, 2 MHz
Default value: 2 Mbit/s
2 Mbit/s, 2 MHz
Default value: 2 Mbit/s
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
System
Configuration Guide
Description
Displays the name of the NE.
The External Clock Output
Mode When 2M Output
Synchronous Source Is
Invalidparameter is used to
specify an action to control
the output mode of external
clock source when all the
clock sources in the 2M
phase-locked source priority
table become invalid or when
the clock quality of the
selected source is inferior to
the output quality threshold
of external clock source.
You can click 7.112
External Clock Output
Mode When 2M Output
Synchronous Source Is
Invalid to display the
detailed information.
The NE can provide two
clocks for external outputs.
You need to specify the
output impedance of external
clock 1.
The NE can provide two
clocks for external outputs.
You need to specify the
output impedance of external
clock 2.
The NE can provide two
clocks for external outputs.
You need to specify the
output mode of external
clock 1.
The NE can provide two
clocks for external outputs.
You need to specify the
output mode of external
clock 2.
Issue 02 (2011-06-30)