Status (Link Aggregation) - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
the system priority of the link aggregation group is the same at the two ends, the system MAC
addresses are compared. A MAC address is used if it is of lower value.
If the value of System Priority is smaller, the system priority of the link aggregation group is
higher.
Values
Valid Values
0-65535, in step length of 1
Configuration Guidelines
To take the result selected by the static link aggregation group as the actual value, set System
Priority to a smaller value.
Relationship with Other Parameters
The member port state in the link aggregation group is decided according to these parameters,
such as port working mode, port working rate, whether the port receives LACP packets, port
priority, and system priority.

7.66 Status (Link Aggregation)

Description
The Status (Link Aggregation) parameter specifies the state, which is derived from logical
computation, of each member ports in a link aggregation group.
Impact on the System
When a port is not configured with services, this port can be added to a link aggregation group.
If this port is in service in this link aggregation group, this port can share the service. If this port
is out of service in this link aggregation group, this port cannot share the service.
When a port is already configured with services, this port cannot be added to a link aggregation
group and cannot share the service.
Values
Valid Values
Unknown, In Service, Out of Service
Value
Unknown
Issue 02 (2011-06-30)
Description
Indicates that the link aggregation group is not queried.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
32768
Default Value
Unknown
7 List of Parameters
7-57