Huawei OptiX OSN 550 Configuration Manual page 268

4 Configuring Ethernet Services
4-114
User Paramete
r
User H1 Level
←→
user H3
Direction
Source Slot 4-EFS8-1
Source
VC4
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Sink
Timeslot
Range(e.g.
1,3-6)
Activate
Immediatel
y
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
VC12 The timeslot bound with the service
between user H1 and user H3 is at the
VC-12 level. The service level must be
consistent with the level of the path bound
with the VCTRUNK.
Bidirectiona The service between user H1 and user H3
l is a bidirectional service.
When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the Ethernet board as the source slot.
VC4-4 The value range of Source VC4 is
consistent with the value range of
Available Resources, which is set for the
paths bound with VCTRUNK4. In the case
of VCTRUNK4, Available Resources is
set to VC4-4.
21-30 The value range of the source timeslots is
consistent with the value range of
Available Timeslot, which is set for the
paths bound with VCTRUNK4. In the case
of VCTRUNK4, the value of Available
Timeslot is from VC12-21 to VC12-30.
6-SL4D-2 When you create a bidirectional SDH
(SDH-2) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the line board as the sink slot.
VC4-1 In this example, VC4-1 is specified as the
VC-4 timeslot of the Ethernet service on the
line board.
6-15 The value range of the sink timeslots can be
the same as or different from the value
range of the source timeslots. The number
of source timeslots must be, however, the
same as the number of sink timeslots. For
example, if the source timeslots are 10
VC-12s, the sink timeslots must be 10
VC-12s.
Yes -
System
Configuration Guide
Issue 02 (2011-06-30)