Send Direction (Ethernet Test) - Huawei OptiX OSN 550 Configuration Manual

7 List of Parameters
Values
Valid Values
1-1000, in step length of 1
Configuration Guidelines
Set this parameter to a proper value according to the test accuracy and the system resource used
in the test.
Relationship with Other Parameters
None.

7.40 Send Direction (Ethernet Test)

Description
Send Direction (Ethernet Test) indicates the transmit direction of the test packet.
Impact on the System
The system operation is not affected.
Values
Value Range
SDH Direction, /
The following table lists the description of each value.
Value
SDH Direction, /
/
Relationship with Other Parameters
This parameter is valid and displayed as SDH Direction only when Send Mode is set to Burst
Mode or Continue Mode. This parameter is displayed as / when Send Mode is set to
Disabled.
7-38
OptiX OSN 550 Multi-Service CPE Optical Transmission
Default Value
/
Description
Indicates that the test packet is transmitted from the
VC trunk port to the SDH side.
Indicates that the parameter is invalid.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Configuration Guide
Default Value Unit
1 Attempt
Issue 02 (2011-06-30)
System