Replicating The Ne Data; Uploading The Ne Data - Huawei OptiX OSN 550 Configuration Manual

2 Creating the Network

2.2.2 Replicating the NE Data

You can directly replicate the data of an NE that is of the same NE type and NE version to the
newly created NE.
Prerequisite
l
l
l
Procedure
Step 1 Double-click the unconfigured NE on the Main Topology. Then, the NE Configuration
Wizard dialog box is displayed.
Step 2 Select Copy NE Data and click Next. Then, the NE Replication dialog box is displayed.
Step 3 Select the NE from the drop-down list and click Start. Then, the Confirm dialog box is
displayed, indicating that the replication operation copies all the data of the source NE.
NOTE
Step 4 Click OK. Then, the Confirm dialog box is displayed, indicating that the replication operation
results in the loss of the original data of the NE to which the data is replicated.
Step 5 Click OK to start the replication.
Step 6 Wait for several seconds. Then, in the Result dialog box indicating that the operation succeeded,
click Close.
----End

2.2.3 Uploading the NE Data

By uploading the NE data, you can synchronize the current NE configuration data to the
U2000 directly.
2-8
The NE must be created successfully.
The NE type and NE version of the source NE must be the same as the NE type and NE
version of the newly created NE.
You must be an NM user with "NE operator" authority or higher.
After the NE data is replicated, only the data on the U2000 is changed, but the data on the equipment is
not changed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Issue 02 (2011-06-30)