Changing The Ne Name; Deleting An Ne - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Procedure
Step 1 In the NE Explorer, select an NE and then choose Configuration > NE Attribute from the
Function Tree.
Step 2 Click Modify NE ID. Then, the Modify NE ID dialog box is displayed.
Step 3 Enter New ID and New Extended ID. Then, click OK.
Step 4 Click OK in the Warning dialog box that is displayed.
----End

5.1.2 Changing the NE Name

You can change the NE name according to the requirements. Changing the NE name does not
affect the operation of the NE.
Prerequisite
You must be an NM user with "NE operator" authority or higher.
Procedure
Step 1 In the NE Explorer, click the NE and choose Configuration > NE Attribute from the Function
Tree.
Step 2 In NE Attribute list, enter a new NE name in Name. Click Apply. Then, a dialog box is
displayed, indicating that the operation is successful.
NOTE
Step 3 Click Close.
----End

5.1.3 Deleting an NE

If you have created a wrong NE, you can delete the NE from the U2000. Deleting an NE removes
all the information about the NE from the U2000 but does not affect the operation of the
equipment.
Prerequisite
You must be an NM user with "NM maintainer" authority or higher.
Precautions
If an NE is deleted, the links related to the NE are also deleted.
Issue 02 (2011-06-30)
An NE name can contain a maximum of 64 letters, symbols, and numerals, but cannot contain the following
special characters: | : * ? " < >.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Modifying the Configuration Data
5-3