OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
5.4.5 Deleting EVPLAN Services
EVPLAN services need to be deleted when the Ethernet boards that are configured with the
EVPLAN services need to be deleted or when the configuration of the EVPLAN services is
incorrect.
Prerequisite
You must be an NM user with "NE operator" authority or higher.
Background Information
Deleting an EVPLAN service involves the following:
1.
2.
Context
When the VLAN filtering table is deleted, the VLAN unicast entries and disabled MAC address
entries are deleted.
Procedure
Step 1 In the NE Explorer, select an Ethernet board and then choose Configuration > Ethernet
Service > Ethernet LAN Service from the Function Tree.
Step 2 Click Query.
Step 3 Click the VLAN Filtering tab.
Step 4 Select the VLAN filtering entry to be deleted and click Delete.
Step 5 Click the Service Mount tab.
Step 6 Select the EVPLAN service to be deleted and click Delete. Click OK in the Prompt dialog box
that is displayed. Then, a dialog box is displayed, indicating that the operation is successful, that
is, the EVPLAN service is deleted successfully.
Step 7 Click Query to check whether the EVPLAN service is deleted.
Step 8 See
----End
5.5 Modifying the Protection Subnet
This topic describes how to modify the configuration data of the existing protection subnet.
5.5.1 Deleting Protection Subnets
Issue 02 (2011-06-30)
Deleting the VLAN filtering table
Deleting the service mounting configurations
CAUTION
5.4.2 Deleting SDH Services
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
to delete the cross-connections of the EVPLAN service.
5 Modifying the Configuration Data
5-13