Configuring Broadcast Data Interfaces; Table 2-10 Parameters For Configuring Broadcast Data Interfaces - Huawei OptiX OSN 550 Configuration Manual

2 Creating the Network
Field
Data Channel 2
Available Data Channel

2.12.3 Configuring Broadcast Data Interfaces

This topic describes the parameters that are used for configuring broadcast data interfaces.
Table 2-10

Table 2-10 Parameters for configuring broadcast data interfaces

Field
Overhead Byte
2-40
Value Range
-
-
list the parameters that are used for configuring broadcast data interfaces.
Value Range
SERIAL1, SERIAL2,
SERIAL3, SERIAL4
Default value: SERIAL1
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Description
The Data Channel (F1 Data
Port) parameter specifies the
uplink and downlink ports
that pass through the F1
data. displays pass-through
channel 2, namely, the sink
port of the data services at the
local station.
You can click 7.107 Data
Channel (F1 Data Port)
display the detailed
information.
Displays all the available
data interfaces or optical
interfaces.
Description
The Overhead Byte
(Broadcast Data Port)
parameter specifies the
number of the overhead
bytes, which are used to
transmit orderwire broadcast
data services, in the SDH
frame header.
You can click 7.108
Overhead Byte (Broadcast
Data Port) to display the
detailed information.
Issue 02 (2011-06-30)
to