Car Id (Car Configuration); Enabled/Disabled (Car Configuration) - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide

7.55 CAR ID (CAR Configuration)

Description
The CAR ID (CAR Configuration) parameter specifies the ID of a committed access rate
(CAR). When a CAR is created, it needs to be specified with a CAR ID.
Impact on the System
The system running is not affected.
Values
Value Range
1-65535
Configuration Guidelines
You can set this parameter to any value in the value range as required. A CAR maps a CAR ID.
Relationship with Other Parameters
None.

7.56 Enabled/Disabled (CAR Configuration)

Description
The CAR Enabled/Disabled (CAR Configuration) parameter specifies whether a CAR can
limit the traffic volume.
Impact on the System
After the CAR is enabled and bound with a flow, the traffic volume of the flow is limited
according to the value of the CAR parameter. If the transmitted traffic is greater than the specified
value, the excessive traffic is discarded.
Values
Value Range
Enabled, Disabled
The following table lists the description of each value.
Issue 02 (2011-06-30)
Default Value
Disabled
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Default Value
1
7 List of Parameters
7-49