Creating Virtual Fibers; Creating Dcn Communication Cable - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Step 5 Click OK.
Step 6 Click the button in Sink NE. Select the sink board and sink port in the Select Fiber/Cable
Sink dialog box that is displayed.
Step 7 Click OK. Then, the created fiber is displayed between the source NE and the sink NE in the
Main Topology.
Step 8 Right-click the created fiber and choose Detect Link from the shortcut menu. The Operation
Result dialog box is displayed, indicating the information on the fiber connections.
----End

2.4.3 Creating Virtual Fibers

When the U2000 manages the SDH, PTN, and WDM equipment at the same time, you can create
virtual fibers between the SDH or PTN equipment (with the WDM equipment in between), to
facilitate network management.
Prerequisite
l
l
Background Information
l
l
l
Procedure
Step 1 Right-click in the blank area of the Main Topology, and choose New > Link from the shortcut
menu.
Step 2 In the Create Link dialog box, choose Fiber/Cable > Virtual Fiber.
Step 3 Set the fiber/cable attributes in the attribute list on the right.
Step 4 Click OK.
----End

2.4.4 Creating DCN Communication Cable

The U2000 can communicate with NEs through the Ethernet port or serial port. The NEs can
also communicate with each other through the extended ECC. Depending on the communication
mode, different types of communication cables can be created on the U2000.
Prerequisite
You must be an NM user with "NE operator" authority or higher.
Issue 02 (2011-06-30)
You must create fiber connections according to the true fibers that connect the SDH and
WDM or PTN equipment.
You must be an NM user with "NE maintainer" authority or higher.
In the case of SDH equipment, the virtual fibers ensure the automatic fiber search and SDH
trail management functions are independent of each other.
The source and sink ports of the virtual fibers must be SDH ports. On the source and sink
ports, there must be two physical fibers that are connected to the WDM or PTN equipment.
The virtual fibers do not support the expansion function.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Creating the Network
2-13