Switching Mode (Msp) - Huawei OptiX OSN 550 Configuration Manual

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Values
Value Range
Normal, Retiming Mode of
Tributary Clock, Retiming
Mode of Cross-Connect Clock
The following table provides the description of each value.
Value
Normal
Retiming Mode of Tributary
Clock
Retiming Mode of Cross-
Connect Clock
Configuration Guidelines
Select the proper clock according to the actual networking planning of the user.
The OptiX OSN equipment supports only Retiming Mode of Tributary Clock.
This parameter is applicable to only SP3D boards.

7.130 Switching Mode (MSP)

Description
The Switching Mode parameter specifies the switching mode of the linear MSP.
Impact on the System
The system operation is not affected.
Values
Value Range
Single-Ended Switching, Dual-
Ended Switching
The following table provides the description of each value.
Issue 02 (2011-06-30)
Default Value
Normal
Description
Indicates that the retiming clock is not used.
Indicates that the tributary clock is used as the retiming
clock.
Indicates that the cross-connect (external) clock is used as
the retiming clock.
Default Value
Single-Ended Switching
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 List of Parameters
7-107