Huawei OptiX OSN 550 Configuration Manual page 249

OptiX OSN 550 Multi-Service CPE Optical Transmission
System
Configuration Guide
Issue 02 (2011-06-30)
User Paramete
r
User F1 Level
←→
user F3
Direction
Source Slot 4-EFS8-1
Source
VC4
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Sink
Timeslot
Range(e.g.
1,3-6)
Activate
Immediatel
y
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Value in Description
This
Example
VC12 The timeslot bound with the service
between user F1 and user F3 is at the VC-12
level. The service level must be consistent
with the level of the paths bound with the
VCTRUNK.
Bidirectiona The service between user F1 and user F3 is
l a bidirectional service.
When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the Ethernet board as the source slot.
VC4-4 The value range of Source VC4 is
consistent with the value range of
Available Resources, which is set for the
paths bound with VCTRUNK2. In the case
of VCTRUNK2, the value of Available
Resources is VC4-4.
6-10 The value range of the source timeslots is
consistent with the value range of
Available Timeslots, which is set for the
paths bound with VCTRUNK2. In this
example, the value range of Available
Timeslots is from VC12-6 to VC12-10.
6-SL4D-2 When you create a bidirectional SDH
(SDH-2) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the line board as the sink slot.
VC4-1 In this example, VC4-1 is specified as the
VC-4 timeslot of the Ethernet service on the
line board.
1-5 The value range of the sink timeslots can be
the same as or different from the value
range of the source timeslots. The number
of source timeslots must be, however, the
same as the number of sink timeslots. For
example, if the source timeslots are five
VC-12s, the sink timeslots must be five
VC-12s.
Yes -
4 Configuring Ethernet Services
4-95