Huawei OptiX OSN 550 Configuration Manual page 88

3 Configuring SDH Services
Step 2 Refer to
Parameter
Level
Direction
Source Slot
Source VC4
Source Timeslot
Range(e.g.1,3-6)
3-6
Parameter Value in
This
Example
Level VC12
Direction Bidirectiona
l
Source Slot 3-SP3D
Source VC4 -
Source 1-5
Timeslot Range
(e.g.1,3-6)
Sink Slot 1-SL1D-1
(SDH-1)
Sink VC4 VC4-1
Sink Timeslot 1-5
Range(e.g.
1,3-6)
Activate Yes
Immediately
Step 1 and configure SDH services on the sink NE (NE2). Set the parameters as follows.
Value in
This
Example
VC12
Bidirectional
3-SP3D
-
1-5
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Description
In this example, E1 services are configured. Hence,
Level of the E1 services is set to VC12.
In this example, the services are transmitted and
received over the same path. That is, the services are
Bidirectional services.
In this example, the SP3D board in slot 3 of NE1 is
configured as the source tributary board. See
3-2.
-
In this example, five E1 services are configured
between NE1 and NE2. Hence, the service source
occupies VC-12s 1-5.
In this example, the SL1D board in slot 1 of NE1 is
configured as the sink line board. See
The service sink uses the timeslots of VC4-1.
In this example, five E1 services are configured
between NE 1 and NE2. Hence, the service sink
occupies VC-12s 1-5.
-
Description
In this example, E1 services are configured. Hence,
Level of the E1 services is set to VC12.
In this example, the services are transmitted and received
over the same path. That is, the services are
Bidirectional services.
In this example, the SP3D board in slot 3 of NE1 is
configured as the source tributary board. See
3-2.
-
In this example, five E1 services are configured between
NE1 and NE2. Hence, the service source occupies
VC-12s 1-5.
System
Configuration Guide
Figure
Figure 3-2.
Figure
Issue 02 (2011-06-30)