Per-Ne Configuration Process; Figure 3-4 Signal Flow And Timeslot Allocation Of The Services On The Non-Protection Ring; Figure 3-18 Signal Flow And Timeslot Allocation - Huawei OptiX OSN 550 Configuration Manual

Multi-service cpe optical transmission system
Table of Contents

Advertisement

3 Configuring SDH Services
3.3.2 Signal Flow and Timeslot Allocation
To configure services on the non-protection ring, you need to plan the traffic direction and
timeslot allocation for the services on the non-protection ring.
Figure 3-4
added to or dropped from NE1 and NE3, and they pass through NE2.

Figure 3-4 Signal flow and timeslot allocation of the services on the non-protection ring

NE2:
Line board

3.3.3 Per-NE Configuration Process

The configuration of the services on the non-protection ring is not related to the configuration
of the protection subnet. To configure the services on the non-protection ring, configure the SDH
services from the tributary board to the line board on the source and sink NEs and the pass-
through services on the intermediate NEs if the protection subnet is already created.
Prerequisite
l
l
l
l
3-10
shows the signal flow and timeslot allocation. In this example, five E1 services are
1-SL1D-2
VC4-1:1-5(VC12)
Pass-through service
1-SL1D-1
Line board
1-SL1D-2
1-SL1D-1
Traffic
direction
The physical topology of the network must be created.
The NEs, boards, and fibers must be created on the U2000.
The created protection subnet must be consistent with the actual network topology. For
details about how to create the protection subnet, see
Ring.
You must be familiar with the information about
Allocation.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
5×E1
VC4-1:1-5(VC12)
3-SP3D
1-SL1D-1
NE1
Two-fiber bidirectional
NE2
non-protection ring
NE3
1-SL1D-2
VC4-1:1-5(VC12)
3-SP3D
5×E1
Line board
Tributary board
Configuration Guide
NE1:
Tributary board
Line board
3-SP3D
1-SL1D-1
线路板
NE4
NE3:
Tributary board
Line board
3-SP3D
1-SL1D-2
2.6.2 Configuring a Non-Protection
3.3.2 Signal Flow and Timeslot
Issue 02 (2011-06-30)
System

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents