Huawei OptiX OSN 550 Configuration Manual page 208

4 Configuring Ethernet Services
4-54
User Paramete
r
Sink
Timeslot
Range(e.g.
1,3-6)
Activate
Immediatel
y
User B1 Level
Service
Direction
Source Slot 4-EFS8-1
Source
VC4
Source
Timeslot
Range(e.g.
1,3-6)
Sink Slot
Sink VC4
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OptiX OSN 550 Multi-Service CPE Optical Transmission
Value in Description
This
Example
1-5 The value range of the sink timeslots can be
the same as or different from the value
range of the source timeslots. The number
of source timeslots must be, however, the
same as the number of sink timeslots. For
example, if the source timeslots are five
VC-12s, the sink timeslots must be five
VC-12s.
Yes -
VC12 The timeslot bound with the service of user
B1 is at the VC-12 level. The service level
must be consistent with the level of the path
bound with the VCTRUNK.
Bidirectiona The service of user B1 is a bidirectional
l service.
When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the Ethernet board as the source slot.
VC4-4 The value range of Source VC4 is
consistent with the value range of
Available Resources, which is set for the
paths bound with VCTRUNK2. In the case
of VCTRUNK2, the value of Available
Resources is VC4-4.
6-15 The value range of the source timeslots is
consistent with the value range of
Available Timeslots, which is set for the
paths bound with VCTRUNK2. In this
example, the value range of Available
Timeslots is from VC12-6 to VC12-15.
6-SL4D-1 When you create a bidirectional SDH
(SDH-1) service from an Ethernet board to a line
board, it is recommended that you set the
slot of the line board as the sink slot.
VC4-1 In this example, VC4-1 is specified as the
VC-4 timeslot of the Ethernet service on the
line board.
System
Configuration Guide
Issue 02 (2011-06-30)