Hitachi CHROMASTER 5160 Instruction Manual page 981

(5) Microplate
The following microplates, microplate seal and cap mat are
recommended.
Table 6-12 Microplates
Name
96-hole microplate
384-hole microplate
Table 6-13 Microplate Seal and Cap Mat
Name
Plate seal
96-hole capmat
NOTE: The plate seal in Table 6-13 is used exclusively for
aqueous samples. For organic solvent samples, use
each microplate by sealing it with the exclusive
thermal fusing type sealer or the like.
NOTE: Use microplate seals to prevent sample evaporation,
contamination, fluid splash, and increase constant
temperature efficiency the well plate, when the
microplate is used.
Otherwise, the instrument performance may be
degraded without the microplate seal.
NOTE: Be sure to use the microplate recommended by
Hitachi High-Technologies. If other microplates are
used, its original performance may not be available.
6 - 13
Type
Manufactured by Nalge
Nunc,
269620
Manufactured by Nalge
Nunc,
265196
Type
Manufactured by
SUMITOMO BAKELITE
CO., LTD.
(Low-adhesion type)
MS-30011
Manufactured by
Whatman Ltd.,
7704-0105
Remarks
Flat bottom
Flat bottom
Remarks
Aqueous
sample
Silicone