Hitachi CHROMASTER 5160 Instruction Manual page 488

PROG
(1) Press the
(2) The time program No. setting screen appears.
<Time program No. setting screen>
SET PROGRAM NO. (1-9)
1
Press a numeric key 1 to 9 and then the ENT key to create
or change the program No., or select the existing program
No.
* Initial (default) value: 1
* If the setting will not be changed, press the ESC key to
return to the 1st monitor screen.
(3) The mode setting screen appears. "0" is always indicated
here.
<Mode setting screen>
EDIT MODE (MODIFY=0, NEW=1)
1
Press a numeric key 0 or 1 and then the ENT key to either
use (MODIFY=0) or delete (NEW=1) the conditions in the
time program No. selected above.
* 0 : Conditions in the time program No. selected above
are used; additions or changes can be made in the
program.
1 : Conditions in the time program No. selected above
are deleted, and new conditions can be set.
The system now advances to the step setting screen for
setting the time program, and setting is allowed for the first
step (the cursor moves to TIME).
3 - 28
key.