Hitachi CHROMASTER 5160 Instruction Manual page 173

5. Assembling
5.1 System Power Supply
NOTE: It is not permitted for the user to carry out
installation at the time of delivery. For ensuring
safety and high accuracy in operation of the
instrument, installation of the instrument shall be
carried out by or under supervision of qualified
service personnel of the manufacturer or its
authorized service agent.
For the Chromaster series, the organizer unit has been prepared.
To the organizer (available at option), one pump, one
autosampler, and one detector can be connected. For the
column oven, the power cord needs to be connected to the
column oven unit. If a single organizer is inadequate due to use
of 2 detectors, for example, an AC adapter (option) that matches
the instrument concerned needs to be used.
Connect the power cable from the organizer or AC adapter to
the power connector at the rear left of the detector.
Detector rear
panel side
Appended Fig. 1-3 e-Line Connector and Power Connector
APPENDIX 1 - 8
e-Line connector
Power connector
Positions