(1)
Press the power switch to turn on the power supply.
(2)
At the start, LCD indicates startup screen. After a few
seconds, initial screen will be indicated, and an initialize-
processing test is executed simultaneously.
(a) Startup screen
PUMP
8928116-00
(C) Hitachi High-Technologies Corp. 2012
Initializing, self-testing, and indicating a copyright are
performed. The program number and version will be
confirmed on the startup screen.
The first monitor screen will be indicated after
initialize-processing is completed normally.
Press △
the fifth monitor screen.
Press △
monitor screen.
st
(b) 1
Monitor Screen
TIME
%A
0.0
100
Indication
TIME
%A
%B
%C
%D
FLOW
PRESS
C (or O)
[ -- ]
* Two liquid low gradient operation is operated, so %C
and %D will be always zero.
3 - 2
▽ key to indicate from the second to
▽
ESC key to return to the first
%B
%C
%D
0
0
0
st
Table 3-1 1
Monitor Screen
Description
Program precessing time
A fluid mixture ratio
B fluid mixture ratio
C fluid mixture ratio
D fluid mixture ratio
Pump flow rate
Pump pressure
Auto purge valve open/close state (when it
is connected)
Pump state
FLOW
PRESS
[ -- ]
0.000
0.0
C 1