Other Settings - Hitachi CHROMASTER 5160 Instruction Manual

3.2.5 Other settings

Set a photomultiplier voltage.
Press numeric key (1 to 5, usually input 3) and then the
ENT key.
* Default value: 3
(4) Photomultiplier voltage setting is now completed and the 1
monitor screen returns.
Set the following items.
• Em BANDWIDTH
• ERROR OUT
• LEAK SENSOR
• LAMP
(1) Em BANDWIDTH setting
A bandwidth value of the emission monochromator is
settable. Standard is 15 nm and wide setting is 30 nm.
(a) Press the
(b) The following display will be presented.
<Utility initial screen>
UTILITY (OFFSET=1, TIME CONSTANT=2,
_5 USE PROG=3, PMT VOLT=4, OTHERS=5)
Select OTHERS.
Press numeric key 5 and then the ENT key.
(c) The following display will be presented.
<Others setting screen>
OTHERS (Em BANDWIDTH=1, ERROR OUT=2,
1 LEAK SENSOR=3, LAMP=4)
Select Em BANDWIDTH.
Press numeric key 1 and then the ENT key.
3 - 12
SET UP
UTLTY
key.
st