Hitachi CHROMASTER 5160 Instruction Manual page 392

4. Check against Packing List
5. Assembling
5.1 Removal of Transport Screws
Check the delivered items against the packing list.
NOTE: It is not permitted for the user to carry out
installation at the time of delivery. For ensuring
safety and high accuracy in operation of the
instrument, installation of the instrument shall be
carried out by or under supervision of qualified
service personnel of the manufacturer or its
authorized service agent.
(1) There are three screws for transport on the bottom panel of
the detector.
(2) Remove the screw A for transport using a Phillips
screwdriver.
(3) Remove the screw B for transport and set it at the position
A.
(4) Remove the screw C for transport using a Phillips
screwdriver.
(5) At the position C, set the furnished screw (M5) put in a bag
stuck to the front panel of detector.
(6) Remove two handle screws at the positions D on the front
of detector, and separate the spring washer and plain
washer for transport at each position.
APPENDIX 1 - 8