Hitachi CHROMASTER 5160 Instruction Manual page 51

Monitor screen
INITIAL
Press the
1
screen to the programming mode.
INSERT
Program generation is started
PROG
SET PROGRAM: No. ( 1 – 9 )
1
Select a program number from 1 to 9.
ENT
EDIT MODE (MODIFY = 0,
0
Select EDIT MODE
ENT
PRESSURE (MAX
(0.0 – 40.0) 20.0
Enter MAX and MIN pressure limit.
ENT
TIME FLOW
0.0 1.000
Input TIME, FLOW rate, and EVENT.
Up to 4 entries can be made per step for event.
Refer to 3.2.8 for details of EVENT.
ENT
TIME FLOW
10.0 0.500
A new input screen will be appeared.
Input TIME, FLOW rate, and EVENT.
ENT
TIME FLOW
A new input screen will be appeared. Press the ESC key to
close the input screen, and return to the monitor screen.
ESC
Monitor screen
3 - 14
key to change the mode from manual set
NEW = 1)
MIN)
0.0
EVENT
12 22 32 42
EVENT
EVENT
1
1
1
1