Dynamic Mixer Logbook - Hitachi CHROMASTER 5160 Instruction Manual

3.3.4 Dynamic Mixer Logbook

The total running time after replacement of a maintenance part
for a dynamic mixer (option) is indicated. This function is
enabled only when the dynamic mixer is connected.
This function is used as an index of a replacement for
maintenance parts of the dynamic mixer.
Monitor screen
GLP
GLP (LOGBOOK=1,
1
Select LOGBOOK
1 ENT
LOGBOOK (PUMP SEAL=1,
4 A.VALVE=3,
Select A.VALVE
4 ENT
LOGBOOK (REPORT=1,
1
1=Displaying logbook
2=Resetting logbook
Select REPORT
1 ENT
Select RESET
2 ENT
D. MIX STIRRERCHANGE
<2000 - 2100>
Reset logbook
NOTE: Enter the maintenance part for the dynamic mixer replacing
date.
Enter Month, Date, Year. And press ENT.
In other words, it can't be reset without pressing the ENT
key. Even if the previous data is still indicated, reenter a
desired date and press ENT .
The total running time will be indicated as zero, and
integration will be started.
Monitor screen
PRESSURE M=2,
P.WASH=2,
D.MIX=4, P.VALVE=5)
RESET=2)
D.MIX TIME LAST CHANGED DATE
99999h
The total running time after replacement of a
maintenance part for the dynamic mixer is
indicated.
ENT or ESC
Monitor screen
(MM DD YYYY)
9 1
3 - 43
KEY LOCK=3)
09/01/2010
2010