Vials - Hitachi CHROMASTER 5160 Instruction Manual

6.3 Vials

NOTE: For performance specification checkup, use the
following parts in combination.
Part No.
080-3595
855-2351
080-3704
In the other cases, adjust the rack parameters (refer to
3.2) according to the combination used for your
practical application (indicated in Table 6-4 to 6-11)
and check the reproducibility performance before
proceeding to operation.
NOTE: For good reproducibility, avoid using a septum
repeatedly to prevent a cause of a hole. It causes a
fluctuation of sample concentration in sample vial.
NOTE: Be sure to use the sample vials, caps and septa
recommended by Hitachi High-Technologies (indicated
in Table 6-4 to 6-11).
If other parts are used, the instrument may malfunction
or its original performance may not be available.
6 - 3
Part Name
1.5 mL sample vial
Septum (Si -TEF), slit (-)
Screw cap