Hg Lamp Logbook Data Display - Hitachi CHROMASTER 5160 Instruction Manual

3.3.3 Hg lamp logbook data display

(c) Input a year for YYYY.
<Xe lamp change date setting screen (year)>
Xe LAMP CHANGE
<1-31>
Press numeric keys (2 0 0 0 to 2 1 0 0) and then the
ENT key.
* Even when the same year as desired is indicated, its
numeral must be input again without fail.
(6) Logbook setting is now completed and the 1st monitor
screen returns.
* When a xenon lamp change date is set, the total on
period of the Xe lamp and the number of switching-on
times will be automatically reset accordingly.
Total on period of the Hg lamp, the number of switching-on times
and the date of the last lamp change can be indicated.
GLP
(1) Press the
(2) The following display will be presented.
<GLP initial screen>
GLP (LOGBOOK=1, KEY LOCK=2,
1 WL CHECK=3, Xe CHECK=4)
Select LOGBOOK.
Press numeric key 1 and then the ENT key.
(3) The following display will be presented.
<Lamp selecting screen>
LAMP SELECT (Xe=1, Hg=2)
2
Select Hg.
Press numeric key 2 and then the ENT key.
3 - 20
(MM DD YYYY)
9 1 2010
key.