Hitachi CHROMASTER 5160 Instruction Manual page 34

No. Key
20 INITIAL
1
21
CL
22
ENT
23 P.WASH
9
24 A VALVE
2
Function
Makes the operation status Program Mode.
The operation status at this moment
becomes initial status (the contents of 0
minute of the time program) of the specified
program.
1. When inputting numerical values, if you
notice a mistake before pressing the
ENT key, press this key to clear, then
enter correct numerical values.
2. Releases error.
Registers inputted numerical values.
Starts/Stops the plunger wash pump.
The plunger wash pump delivers wash fluid
to the plunger wash mechanism
automatically according to the setting time.
Press the key once again during washing to
suspend plunger wash.
Opens/Closes the auto purge valve.
The state of the auto purge valve will be
indicated on the first screen of the optional
UI pad.
2 - 9
Remarks
The CL key has the alarm
sound stop function.
It is quite necessary to
press ENT key at the end of
inputting a numerical value.
The key is enabled only
when the optional wash
pump is mounted.
The key is enabled only
when the optional auto
purge valve is mounted.