Hitachi CHROMASTER 5160 Instruction Manual page 168

3. Items to be Prepared by Customer
3.1 Power Supply Arrangement
(f) Shall be free from excessive dust.
Otherwise, performance degradation might be caused.
(g) Shall be free from a sudden change of power supply
voltage. Otherwise, noise might be caused.
(h) Power supply to motor-driven equipment (such as
stirrer and vibrator) without a noise suppressor shall
not be turned ON/OFF frequently on the same power
supply line as that of this instrument.
(1) Power supply voltage: 100 to 240 V AC
Fluctuation shall be ±10% of the rated voltage.
(2) Frequency: 50 or 60 Hz
Fluctuation shall be ±0.5 Hz of the rated frequency.
(3) Power Capacity:
The total system shown comprises an organizer,
Chromaster 5110/5160 pump, Chromaster 5210/5260
autosampler, Chromaster 5310 column oven, Chromaster
5410/5420/5430/5450 detector.
Confirm the necessary power capacity taking actual system
configuration and OA equipment in the installation room
into account and prepare a power supply having an
adequate power capacity.
(4) Power outlet:
Power supply shall be obtainable near the place for
installing the system inclusive of this detector.
This instrument requires one or more grounded power
outlets (3-pole type). One or more outlets are needed for
the entire system (see the section 5.1 of the Appendix.)
APPENDIX 1 - 3
100 VA or more for a single unit and
600 VA or more for the total system