Shutdown; Washing After Use - Hitachi CHROMASTER 5160 Instruction Manual

3.1.5 Shutdown

3.1.6 Washing after Use

The instrument can be shut down by turning off its power switch.
Even when power supply is turned off, the set measurement
conditions are stored in memory. Therefore, when turning on
power supply again, the set conditions before turning off power
supply are called out to allow measurement under the conditions.
After using a buffer solution, be sure to wash the flow cell with
distilled water. If this washing step is neglected, salt will
precipitate so that the flow cell might be clogged and damaged.
3 - 9
3.1.5