Utility Setting; Setting The Offset - Hitachi CHROMASTER 5160 Instruction Manual

3.2 Utility Setting

3.2 Utility Setting

3.2.1 Setting the Offset

The utility setup screen appears.
UTILITY (OFFSET=1, TIME CONSTANT=2,
1 USE PROG=3, POLARITY=4, OTHERS=5)
Input Numeral
1 OFFSET
2 TIME CONSTANT :
3 USE PROG
4 POLARITY
5 OTHERS
The offset is a set input signal value that is added to the actually
measured value for output.
SET UP
UTLTY
1) Press
2) The utility setup screen appears.
Utility Setup Screen
UTILITY (OFFSET=1, TIME CONSTANT=2,
1 USE PROG=3, POLARITY=4, OTHERS=5)
Select OFFSET.
Press [numerical] key [1], and then the [ENT] key.
3) The offset setup screen appears.
Offset Setup Screen
OFFSET (0.000 – 2.000) AU
0.000
3 - 10
SET UP
UTLTY (Utility)
Function
: Set an offset.
Set a time constant.
: Select or avoid use of a time
program.
: Select either polarity.
: Other setting than above.
key.