Hitachi CHROMASTER 5160 Instruction Manual page 569

Loosen the anode nut of the lamp and detach the
anode terminal of the lamp (marked +) from the metal
fixture on the ceramic plate (Fig. 5-5). Be careful not
to touch the lamp bulb. Note that a thin metal wire is
attached near the center of the bulb, which facilitates
ignition of the lamp. Take care not to break this wire
when handling the lamp.
(g) Loosen the cathode nut and remove the cathode lead
plate (Fig. 5-5).
Anode nut
Anode cord
Metal fixture
Ceramic plate
Lamp protrusion
Metal wire
Lamp bulb
Cathode lead plate
Cathode cord
Cathode nut
Fig. 5-5 Detachment of Xenon Lamp
5 - 8