Hitachi CHROMASTER 5160 Instruction Manual page 232

5. Assembling
5.1 System Power Supply
NOTE: It is not permitted for the user to carry out
installation at the time of delivery. For ensuring
safety and high accuracy in operation of the
instrument, installation of the instrument shall be
carried out by or under supervision of qualified
service personnel of the manufacturer or its
authorized service agent.
To the organizer, one Chromaster 5110 pump, one Chromaster
5210 autosampler, one Chromaster 5410/5420/5430/5450
detector and one IFC board can be connected. For the
Chromaster 5310 column oven and Chromaster 5440
fluorescence detector, the power cord needs to be connected to
the column oven unit. If a single organizer is inadequate due to
use of 2 detectors, for example, an AC adapter that matches
the instrument concerned needs to be used.
Connect the power cable from the organizer or AC adapter to the
power connector at the rear left of the detector.
Detector rear
panel side
Appended Fig. 1-3 e-Line Connector and Power Connector
APPENDIX 1 - 8
e-Line connector
Power connector
Positions