Hitachi CHROMASTER 5160 Instruction Manual page 42

th
(e) 4 Monitor Screen
EVENT 1
OFF OFF OFF OFF
Table 3-5 4
Indication
EVENT EVENT terminal 1 to 4 state.
1, 2, 3, 4 ON
OFF :
When a contact becomes ON while a
program link is in execution, even in the next
step it will be in the ON state.
PUMP Low pressure gradient setup state
LFM :
HFM :
FLUSH Column flush setup.
ON/OFF
th
(f) 5 Monitor Screen
LINK PROG.
ON
* When the link program function is in the OFF state,
the screen won't be displayed.
Table 3-6 5
Indication
LINK ON: when the link program function is used.
PROG.
STEP Step No. in execution.
CYCLE Execution cycle number of times
3 - 5
2 3 4 PUMP
LFM
th
Monitor Screen
Description
: Contact is closed,
Contact is OPEN
Low Frequency Mode
High Frequency Mode
STEP CYCLE
1 1/99
th
Monitor Screen
Description
FLUSH [ -- ]
ON 1
[ -- ]
1