Hitachi CHROMASTER 5160 Instruction Manual page 92

PROG (SET PROG No.)
1
No. of program containing step to be
deleted (m)
2
0 ENT
4
Lower limit pressure
level
(5) Deletion of Step
How to delete one step in a program is shown next.
3
(MAX) Upper limit pressure
level
5
ENT
1
Program number can be from 1 to 9.
2
For editing, input 0. For generating a new program, input
1.
3
If pump pressure rises beyond the level set here, the pump
automatically stops.
Set pressure is from 0.1 to 60.0 MPa.
4
If pump pressure falls below the level set here, the pump
automatically stops.
Set pressure is from 0.0 to 60.0 MPa.
5
Press the
on the screen. If display advances beyond that step, press
the key.
6
Press the DEL key when the cursor is on the TIME line
want to delete.
7 When the ESC key is pressed, Edit is finished, and
Monitor screen appears.
ENT (MODIFY=0, NEW=1)
ENT
6
DEL ENT
key until the step you want to delete appears
3 - 55
(MIN)
7
ESC