Hitachi CHROMASTER 5160 Instruction Manual page 594

• Power Supply
Chromaster 5410/5420/
5430/5450 detector
Chromaster 5440
fluorescence detector
Chromaster 5310
Column oven
Chromaster 5210
autosampler
Interface control
board
The power cord is furnished together with the Chromaster 5440
fluorescence detector. Connect this power cord to the rear of
the instrument.
(1) Isocratic System/Low-pressure Gradient System (stacked in
two blocks)
Appended Fig. 1-5 Power Cable Connection Diagram
Appended Table 1-1 Cables to be Used
Connector cable 1)
Connector cable 3)
Connector cable 5)
Connector cable 6)
AC power cable
Plug the power cables from the organizer and column oven
into AC power outlets.
For the Chromaster 5110 pump, Chromaster 5210
autosampler and Chromaster 5410/5420/5430/5450
detector, plug the connector cable from the organizer into
the power connector of each unit.
APPENDIX 1 - 9
Chromaster
5110 pump
P/N 892-6909 (attached to organizer)
P/N 892-6911 (attached to organizer)
P/N 892-6914 (separately available)
P/N 892-6913 (separately available)
Use the power cable attached to each
module unit.
To AC power
supply
6)
5)
3)
1)