Auto Zero; Setting Of Measuring Wavelength - Hitachi CHROMASTER 5160 Instruction Manual

3.1 Turning on Power Supply

3.1.3 Auto Zero

3.1.4 Setting of Measuring Wavelength

ABS indication and output signal on the monitor screen can be
zeroed.
TIME WL ABS
0.0 250 0.0000
Auto zero adjustable range: -0.2 to 2 AU
If this range is exceeded, the following message appears.
A/Z OVER RANGE
PRESS "CL" KEY TO CLEAR MESSAGE
NOTE: Auto zero function is unusable during 2-
wavelength measurement.
A measuring wavelength is settable.
WL
The measuring wavelength setting screen appears.
WAVELENGTH (190 – 900) nm
250 D2 MODE (190 – 600), W MODE (380 – 900)
Press [numerical] keys (within [1][9][0] to [9][0][0]), and then the
[ENT] key.
* Settable wavelength range: 190 to 900 nm, enterable in
1-nm steps
3 - 8
A/Z
(Auto zero)
PROG LAMP
1 D2
(Wavelength)
[I]