Hitachi CHROMASTER 5160 Instruction Manual page 973

Part No. Name
080-3706 1.1 mL sample vial,
500 pcs contained
855-2351 Septum (Si-TEF),
100 pcs contained
080-3710 Septum (PTFE-Si-
PTFE),
500 pcs contained
080-3711 Septum (Si-PTFE),
500 pcs contained
080-3704 Screw cap (black),
500 pcs contained
080-3230 Support sleeve,
50 pcs contained
Table 6-5 Vials
(B)
Specification/Standard
Manufactured by Chromacol, Ltd.
Vial typel: 1.1-STVG,
φ12 × 32 mm,
Pointed-bottom type
With slit (-)
Manufactured by Chromacol, Ltd.
Without slit
Septum type: 8-TST1
Manufactured by Chromacol, Ltd.
Without slit
Septum type: 8-ST14
Manufactured by Chromacol, Ltd.
Cap type: 8-SC
Manufactured by Chromacol, Ltd.
Type: TTS-312,
Teflon
∗
The support sleeve is required for use on the sample rack.
∗∗
When these vials are used for the sample rack (892-0240), cooling
performance will be degraded.
∗∗∗ The rack parameters should be used as reference data for
adjustment of Z = 33 mm.
6 - 5
080-3704
855-2351
080-3710
080-3711
080-3706
1.1 mL
Applicable
Remarks
Rack
892-0230
892-0240