Hitachi CHROMASTER 5160 Instruction Manual page 855

POWER ON
START
Initialization
IDLE status
WASH
PROG
FUNC
UTLTY
GLP
THERMO
(4) Operation flow chart
The flow chart is shown in the figure below.
Each frame is used as follows.
: Indicates a key operation.
: Indicates a status.
STOP
Sequential program
starts.
PAUSE
PAUSE
Analysis sequence
temporarily stops.
PROG
Detergent in wash port is
replaced.
STOP
Sequential program
can be set.
Moves mechanism
independently.
Operating conditions
can be set.
Confidence report can
be displayed and reset.
Keys can be locked.
Thermostat can be set.
Fig. 3-4 Operation Procedure Diagram
Sequential program
stops.
Measurement
continues till end of
sequential program.
Sequential program can
be edited.
Washing action is taken by
the set number of times.
Halfway stop
Movement to needle
replacement position
End of
operation
ENT
For displaying or resetting
confidence report
For locking keys
3 - 11
IDLE
IDLE key input
awaited
END
IDLE
ALL END
IDLE
IDLE key input
awaited
ESC
IDLE (mechanism
initialization)
IDLE
FUNC
or
ESC
or
ENT ESC
LOCK OFF
or
ESC
ENT