Hitachi CHROMASTER 5160 Instruction Manual page 370

5.2 Lamp Replacement
Electric shock due to contact with inside of
instrument!
Be sure to turn off the power switch and unplug the power
cord from the wall receptacle before detaching the light
source cover for lamp replacement.
Prohibition of releasing the safety mechanism!
In this instrument, the safety mechanism functions to turn
off power supply automatically when detaching the lamp
cover. This safety mechanism must not be released
intentionally. Otherwise, there is a risk of electric shock
due to wrong operation.
Burns due to hot temperature
● The lamp and lamp cover are hot during and
immediately after use of the lamp. There is a risk of
burns due to contact with the hot lamp or its cover when
replacing the lamp.
● Before start of lamp replacement, turn off the power
switch and wait for half an hour or longer. After the
lamp has cooled down, it should be replaced with a new
one.
● When detaching the light source cover, the safety
mechanism functions to put out the lamp automatically.
The safety mechanism must not be released
intentionally.
5 - 3
WARNING
WARNING
CAUTION
5.2