Hitachi CHROMASTER 5160 Instruction Manual page 96

1
Program number can be from 1 to 9.
2
For correction, input 0. For generating a new program,
input 1.
3
If pump pressure rises beyond the level set here, the pump
automatically stops.
Values that can be inputted are 0.1 to 60.0 MPa.
4
If pump pressure falls below the level set here, the pump
automatically stops.
Values that can be inputted are 0.0 to 60.0 MPa.
5
Press the key until the step to be corrected appears on
the screen. If the display advances beyond that step,
press the key.
6
When a correction is unnecessary, press the ENT key
only. The allowable input range is 0 to 600.0.
7 When a correction is unnecessary, press the ENT key.
Valid flow is from 0.00 to 5.000.
8 Enter the event code. When a correction is unnecessary,
press the ENT key.
9 When the ESC key is pressed, Edit is finished, and
Monitor screen appears.
3 - 59